Lowered surface temperature by 94F (52.2C), estimated calculated energy savings of 241.06 BTU/hr.ft2.

Problem

Boiler insulation for a large hospital in the southeastern United States. They had a need for insulation that could be applied easily for energy savings and would be long lasting.

Solution

During a  recent boiler trial at a large hospital in the southeastern US, Distributor Quantum Energy Services illustrated the power of the Nansulate™ EPX-H20 with thermal imaging.

The application was performed in two steps, Day 1: 4-coats of the Nansulate™
EPX-H20; and Day 2: 2 more coats of EPX-H20 were added for a total of 6-coats. Just hours after each application the results were as follows:

(BTU estimates reference engineering calculations at Checalc.com).

Infrared imaging during application. Top half of boiler had 4-coats and bottom half had 6-coats of Heat Shield EPX-H20. The temperature was reduced below safe touch to 136F.

Standout Results!

The final analysis showed that Nansulate™ EPX-H20 by Syneffex™ significantly lowered the surface temperature to safe touch and reduced estimated energy consumption (by over 50% estimated reduction). It provided an excellent boiler insulation coating that was easy to apply and also had a 10-year warranty.

Buy Nansulate™ EPX-H2O Coating


Download the Case Study


Hospital Boiler Insulation | Heat Shield EPX-H20 Insulation Coating


Share