PATENTED AWARD WINNING ENERGY SAVING AND ASSET PROTECTION COATINGS... NANOSCIENCE THAT WORKS FOR YOU.             | TOLL FREE: 800-858-3176 | INT'L +1 720-310-3480|

SYNAVAX™ HEAT SHIELDTM EPX-H2O SAFE TOUCH COATING

In As Little As 2 Coats, Reduce Equipment Surface Temperature Fast!

No Downtime, No Corrosion, No Burns or Injuries

Patented Nano-engineered Thermal Insulation in a Class of its Own.
Corrosion Proof. Chemical Resistance. Pays for Itself Fast… in Approximately 12 Months.
Keeps Saving You Money for 10 Years or More.

BUY NOW

Syneffex™ Heat Shield™ safe touch coating is the top choice for industries around the world that need to reduce surface temperature to OSHA safe touch, reduce burn injury risk, increase energy efficiency and save money. Syneffex™ Heat Shield™ EPX-H2O Coating is proven to solve the most difficult energy efficiency, corrosion, CUI, and safe touch problems of factories and many industries.

Syneffex™ Thermal Insulation Coatings are the top choice for a wide variety of thermal insulating paint applications over pipes, pipelines, tanks, ovens, processing vessels, heat exchangers and more.

Syneffex™ patented industrial thermal insulation paint solves corrosion-under-insulation (CUI) by both insulating and preventing corrosion with a single product. Our thermal paint coatings are multipurpose spray applied products that are simple to deploy.

SHOP NOW
REQUEST A SPECIFICATION

PERFECT FOR

  • Steam Process
  • Euipment
  • Hot Ovens
  • Boiler insukation
  • Ductwork Insulation
  • Heat Exchanger Insulation
  • Metal Buildings
  • Industrial Heat Equipment
  • Too Hot Handrials
  • Wall & Ceiling Insulation

HOW IT WORKS

Spray applied thermal insulating paint

Spray-on thermal insulating coatings by Syneffex™ can be used up to 400F/204C, fit any shape of equipment and do not require any exterior jacketing.

Spray equipment while in service

You can spray apply this technology easily while equipment is in-service and our concentrated insulation coatings will work diligently for 10 years or more without degrading.

WATCH THIS DEMO!

KEEP YOUR WORK FAMILY SAFE

Protect Your Employees, Reduce Incident Reports, Be A Workplace Hero.

  • Reduces hot equipent to and employee safe touch temprature
  • Reduces recordable injury rates from burns
  • Keep heat inside the equipment, reducing worker heat stress in hot areas
  • Keep handrails and benches from heating up in the sun
  • Cool metal buildings and warehouses

MAKE SAFETY A TOP PRIORITY

  • Lowers Surface Temprature
  • Safe Touch Solution
  • Reduce Radiant Heat
  • Prevent Mold Growth
  • Improves Building Health
  • Keeps Working Environment Cooler
  • Touch & Durable
  • Water-based, non-toxis
  • Low VOC

WHY CHOOSE SYNAVAX™ ?

  • PAYBACK PERIOD WITHIN 6-18 MONTHS*
  • AVERAGE ENERGY SAVINGS OF +20%*

  • FAST CURE LOWER HOT SURFACE TEMPT IN 1-2 HOURS

  • ENERGY SAVING INSULATION COATING THAT STOPS CUI

  • SPLASH RESISTANT TO ACIDS, BASES & FUELS

  • EASY TO APPLY WITH A STANDARD SPRAYER

  • EARTH-FRIENDLY, SUSTAINABLE, WATER-BASED, LOW VOC, NON-TOXIC

  • RAPID SAFE TOUCH COATING ALLOWS HOT EQUIPMENT TO BE TOUCHED IN HOURS*

* Individual results can vary

Sustainability Simplified & Sustainability Accelerated….That’s Our Promise!

OUR SUSTAINABLE CUSTOMERS AROUND THE WORLD

They Could have chosen anyone, They chose us.

Susan B. Anthony Voters
Block Project, Rochester, NY

Lead Abatement

leadtesti_img1

Approved lead encapsulation for historical building renovation project in Rochester, NY

PROBLEM

Architecture and engineering firm, Quad3, was tasked with finding a suitable lead encapsulation coating for a $27 million historical renovation project by Home Leasing in Rochester, New York. The project includes rehabilitation of the Susan B. Anthony Voters Block area, creating 120 new and refurbished homes plus 12 commercial sites.

SOLUTION

LeadX™ clear lead encapsulation coating was approved by the New York Historical Preservation office for the project. It offered a safe way to encapsulate the lead contaminated brick for safe occupancy, while also providing an environmentally friendly, low VOC protective coating for the historical building.

American Red Cross Headquarters

Clear Lead Abatement

leadtesti_img1
PROBLEM

The American Red Cross Headquarters was looking for a lead encapsulation coating that would remediate lead contaminated surfaces in an easy, cost effective way.

SOLUTION

In 2006, the Central Louisiana Chapter of the American Red Cross received a gift of $958,629 from the Canadian Red Cross specifically designated to support the construction of an American Red Cross chapter headquarters in Central Louisiana. After finding a suitable property to rehabilitate into their headquarters, they began the first phase.
The Environmental Site Assessment revealed concerns about lead in paint, brick and wood which needed to be addressed.
LeadX™, clear lead encapsulation coating was chosen to encapsulate lead and offered an environmentally friendly way to remediate lead contamination in the building to make it safe for use that was an affordable and viable option for the American Red Cross.

Second Line Frames

Lead Abatement of Reclaimed Wood

leadtesti_img1
PROBLEM

Needed to encapsulate any potential lead based paint on reclaimed wood being used to make picture frames without changing the distinct look of the wood.

SOLUTION

Syneffex™ LeadX™ clear lead encapsulation and protective coating
Coverage: 2-coats

RESULTS:
  • Encapsulated surfaces for lead abatement
  • Allowed the beautiful colors and unique look of the painted wood to show through
  • Non-toxic, water-based, perfect for home products
  • Easy to apply and affordable

View More

National Naval Aviation Museum

Lead Abatement

leadtesti_img1
PROBLEM

The National Naval Aviation Museum, the world’s largest museum of naval aviation, was expanding to a new hangar and needed to abate lead on the hangar floor to make it safe for visitors.

SOLUTION

LeadX™ clear lead encapsulation coating by Syneffex™ was chosen because of its stellar reputation by the environmental contracting industry and due to its easy application, smooth finish, and ability to be over coated by an abrasion resistant floor coating. The LeadX™ lead abatement coating played an important role in making the hangar environmentally safe from lead exposure for the many museum visitors.

View More

Commercial Office Building, Atlanta, GA

Lead Abatement

leadtesti_img1
PROBLEM

A large 3-story building in Atlanta, Georgia was being renovated into commercial office space. The environmental contractors hired for the job needed to find a suitable form of lead abatement that would encapsulate the lead and that was also cost effective and wouldn’t take up rentable office square footage.

SOLUTION

After initial patch tests were completed successfully, LeadX™ was chosen for use in the 30,000 SF building to encapsulate the lead contaminates. LeadX™ offered a cost effective solution and was the only clear encapsulant that could be applied to the wide variety of surfaces, including wood and brick.

View More

EPX H20

Heat Shield EPX-H2O Insulating Paint

HEAT SHIELD™ EPX-H2O THERMAL INSULATION AND PROTECTIVE COATING

Heat Shield™ EPX-H2O is a powerful nano-engineered 2-part water based reactive prepolymer that provides thermal insulation for applications where superior performance is needed.

BENEFITS OF SYNAVAX™ HEATSHIELD COATING

  • No Downtime- Apply Without Shutting Machinery Down
  • No Cladding Required Eliminating the Threat Of Hidden CUI
  • Can Be Applied To Nearly Any Surface
  • Meet OSHA Safety Standards
  • Long-Term Solution, 10+ Years
  • Be A Hero! Save Your Company Time & Money
  • No Corrosion

Heat Shield™ EPX-H2O Thermal Insulation and Protective Coating

Coverage Rate per Gallon:
188 S.F. @ 1 coat (10 mils/254 microns wet film thickness)
Standard application is typically between 4-10 coats (depending upon needs)

Actual coverage rate may vary depending on surface texture. All products are sold by weight, not volume.

ASK US ABOUT CONTRACTOR AND VOLUME DISCOUNTS, CALL 800-858-3176.

Patented Technology

Description

Heat Shield™ EPX-H2O is our #1
High Temperature Industrial
Protective Thermal Insulation

Proven to solve the most difficult
energy efficiency, corrosion, CUI, and safe touch problems
of factories and industries.

Technology Patented Worldwide

Heat Shield™ EPX-H2O is a powerful 2-part water based reactive prepolymer that provides thermal insulation for applications where superior performance is needed. It has excellent splash resistance to chemicals. Heat Shield™ EPX-H2O is splash resistant to: 98% sulphuric acid, ammonia, bleach, and other acids, bases and fuels.

BENEFITS:

* Thermal Insulation
* Energy Savings
* Corrosion Prevention
* Moisture Resistant
* Safe Touch Solution
* Chemical Resistant
* Abrasion Resistant
* 10 Year Warranty | Maintains Performance Over Lifespan
* Easy to Apply – Tough & Durable
* Use on Surfaces up to 400F/204C

PERFECT FOR:

* Steam Pipes | Pipe Insulation
* Dye Pots
* Boilers | Boiler Insulation
* Textile Equipment
* LNG Tanks | Tank Insulation
* Marine HFO Systems
* Heat Exchangers
* Dryer End Covers
* Fuel/Chemical Storage Tanks
* Other Hot and Cold Process Equipment

 

FLIR THERMAL IMAGING VIDEO

See how 7-coats of the Heat Shield™ EPX-H2O reduced this steam pipe to a safe touch temperature.  This paper mill saw a reduction from 120C (248F) to approximately 50C(122F). That’s a difference of -70 Celsius (-126 Fahrenheit)!

Need Help with a Specification? Click Here!

Save Money with an EPX-H20 Premiere Kit (Includes Sprayer!)

 

Featured Case Studies

Be Brilliant. Buy Heat Shield™ EPX-H2O Now. Sustainability Simplifed™

Heat Shield EPX-H2O Downloads

Product Data Sheet |  Application and Mixing Guide | SDS Part A | SDS Part B

 

Additional information

Weight N/A
Dimensions N/A
Purchase (Size):

2 Gallon Kit, 5 Gallon Kit

Color:

White, Charcoal Grey, Custom Tint

Chemical Resistance

Splash resistant to acids, bases, and fuels

Corrosion Resistance: ASTM B117

750 hours, Excellent

Impact Resistance: ASTM D2794

15 in. lb.

Flame Spread: ASTM E84

Class A

VOC Content

Less than 150 g/L (low VOC)

Type

Water-based, 2-part epoxy, non-hazardous

Coverage Rate

188 S.F. (17.5 m2) per gallon at 1-coat (10 mils/254 microns wet film thickness)

Typical Application

2 – 4 coats EPX-H2O, applied at 10 mils/254 microns each coat. No primer needed.

3 reviews for Heat Shield™ EPX-H2O Thermal Insulation and Protective Coating

  1. Customer Review Highlights

    “Steam consumption on our textile dyeing machines was reduced from 1,326 kg per process cycle to only 651 kg per process cycle – a 51% reduction as compared to before Heat Shield™ EPX4-H2O insulation was used.” -Elasteks Textile

  2. Customer Review Highlights

    “Having comprehensively tested the Heat Shield™ High Heat and EPX4-H2O coatings, we found they significantly reduced process energy whilst standing up to the harsh environment of an industrial dye house…reducing our process steam consumption by over ten percent – and therefore our carbon footprint by around two percent.” -Coats plc

  3. Customer Review Highlights

    “The EPX4-H2O stood up to the moist environment well without degrading. Initial temperature readings were taken on the exterior of the steam line and showed a surface temperature reduction from 160C to 80C (320F to 176F) with the coating.” -Unilever affiliate Unipro

Only logged in customers who have purchased this product may leave a review.

REQUEST A CUSTOM SPECIFICATION

Our Technical Team is pleased to assist you with a project specification and estimate to make your job simpler. Our specifications include recommendations for which product(s) to use, the thickness (number of coats) we recommend to meet your goals, application details, pertinent product data sheets and case studies. If we have all of the necessary information, we can include a payback estimate too.