Insulating Heat Exchangers Is Not Always Easy. But it Can Be!

Syneffex™ Coatings Fit Any Equipment Shape Like a Glove  

Read on for a remarkable and innovative way to save energy, lower surfaces to safe touch, and prevent corrosion on heat exchangers.

What is the Best Way to Insulate Your Heat Exchanger?

We may be biased, but we think you will see that our results speak for themselves. Syneffex™ Heat Shield™ products are powerful, built to last in factory environments, and easily sprayed on to any size or shape of equipment.

Need heavy duty protection? Heat Shield™ EPX-H2O is tough and insulates from 400F/204C all the way down to safe touch.

Have a tight space with no place for thick insulation? No problem! Heat Shield™ High Heat is a smooth 1-part coating that squeezes into any tight area and provide significant performance in a thin-film solution.

Syneffex™ products can help you expertly and simply insulate your heat exchangers!

Our innovative energy saving and asset protection coatings help Facility Managers overcome the challenges of insulating odd configurations and equipment in hot, moisture-laden environments. These nano-engineered coatings provide spectacular results, simply! They also provide world-class protection from corrosion and CUI, while also insulating.

If you are trying to protect your heat exchangers from corrosion and want to save energy and boost your profits, we have the best solution!

We are not the only ones who think so… See what our  global customers have to say!

The Bandvulc Group Finds a Better Solution

Easy Insulation for a Plate Heat Exchanger

Bandvulc Tyres in the UK saved energy and lowered exterior surface temperature. They found the application of Heat Shield™ Heat Heat for heat exchanger insulation easy and effective.

“Bandvulc Tyres Ltd. applied Heat Shield™ High Heat to the exterior of a heat exchanger plate. The first coat was applied thinly… then more coats were applied up until the 8th coat. The result now shows a temperature difference of roughly 30 degrees C (86 degrees F). “

-Calum Williams, Bandvulc Tyres, Ltd

Their heat savings difference was an impressive 24.6%! 

Bold Results. Real Energy Savings. 

More Heat Exchanger Case Studies | They Could’ve Chosen Anyone. They Chose Us!

See More Industrial Energy Saving Case Studies

Patented Technology with Superior Design

See How Easy it Is to Apply

Performance You Can Count On

  • Save energy by keeping heat inside your heat exchanger

  • Fast cure means amazing results in just hours

  • Customers typically report energy savings of 15%-35% or more

  • Prevents corrosion and stops CUI

  • Easy to apply with a texture sprayer while equipment is in service.

  • Sustainable, water-based, and low VOC

Ready to Order Syneffex™ Coating for Heat Exchanger Insulation?

We provide complimentary Gold Standard Application Support by phone, email, or video call.

If you are shipping internationally, please chat, email, or call us for a quote. You may use the online cart for orders under 25 gallons, but over 25 gallons, please call for a shipping quote so we can get you the best rate. :)

Sustainable Brewing With Insulation Coatings

Looking for Our #1 Heavy Duty Industrial Coating?

Order Heat Shield™ EPX-H2O

A 2-part coating with a grey or white (tintable), pebbled finish that’s fast cure and is abrasion and chemical resistant. This is one tough insulation coating!

Visit the product page here.

Order 2-gallon size

$346.00Add to cart

Order 5-gallon size

$865.00Add to cart

Thin Film Heat Exchanger Insulation

Looking for a Smooth, Thin Film Insulation?

Order Heat Shield™ High Heat

A thinner 1-part coating with a smooth, matte finish. More coats are typically needed than for EPX-H2O, but it will give you a smooth option when you need it. Dries clear over surfaces below 170F and opaque over hotter surfaces.

Visit the product page here.

Order 5-gallon size

$725.00Add to cart

Need Some Help Estimating? Get a Free Specification.