Informational Videos. Sustainability Simplified™.

See our products in action! Syneffex™ coatings are a patented thermal insulating paint technology that people often enjoy seeing in action. It’s definitely impressive! We’ve gathered several videos below illustrating the multiple benefits of Syneffex™ thermal insulating paint for buildings and thermal insulation coatings for heat process equipment, like steam pipes, boilers and more.

You’ll find a Flir thermal imaging video showing a surface lowered to a safe touch level in just a few hours with patented nanotechnology based coating Heat Shield™ EPX-H2O. This one’s a real powerhouse product. It reduced the pipe by 88C (-158.4F), from a very hot 138C (280.4F) down to a cool enough to touch 50C (122F).

See how our clear insulating paints for walls and roofs stand up to weathering and reduce moisture infiltration. And you won’t want to miss our most popular thermal insulation coating demonstration video using water drops on a coated and uncoated panel.


Syneffex™ Safe Touch Insulation Demo

A demonstration of the power of Heat Shield™ EPX-H2O coating. The uncoated section of pipe shows a temperature of 352F and is reduced to a safe touch temperature in just two hours!

Syneffex™ Heat Shield™ EPX-H2O Mixing & Application Video

See how easy it is to use our heavy duty Heat Shield™ EPX-H2O insulating coating anywhere you need some insulation for energy savings, personnel safety, and more. This easy step-by-step video shows how easy this insulating paint is to apply, even while your equipment is in operation.

Syneffex™ Case Study – Steam Pipe Insulated to Safe Touch

This Flir video shows how our patented thermal insulation coating, Heat Shield™ EPX-H2O, insulated this steam pipe to a safe touch temperature. The uncoated pipe is greater than 120C (248F) — It’s actually 138C (280.4F). The EPX-H2O coated surface drops to approximately 50C (122F) with just 6-coats (thickness of only 1.5 mm).

Syneffex™ Hydrophobic Coatings – Coated on Top Half

All our thermal insulation coatings are water-repellent, yet breathable. See the dramatic difference when water is poured over the coated (top) versus uncoated (bottom) of the roof tile.

Effective Boiler Insulation with EPX-H20 Insulation Coating

See how easy Heat Shield™ EPX-H2O industrial thermal insulation coating is to apply in this video. Suitable for boilers, steam pipes, and so much more!

Syneffex™ Tank Insulation Coatings

Insulating tanks and preventing corrosion and CUI is easy with thermal insulating coatings by Syneffex™. Our tank insulation coatings are easy to apply with a paint sprayer or texture sprayer and stand up well to weathering.

Energy Efficient Boilers with Heat Shield™ EPX-H20

If you have just 15 minutes, you can learn all about our Heat Shield™ EPX-H2O insulation paint in this pre-recorded webinar video. Learn about the dramatic temperature reduction, application tips, and more.

Syneffex™ Water Drop Demonstration

It’s easy to see the effectiveness of Syneffex™ patented nanotechnology based thin film insulation coatings. Watch the demonstration which is with just three thin coats of our Heat Shield™ High Heat Coating that gives a 31 degrees F (17 degrees C) reduction.

Syneffex™ 21st Century Insulation Coatings Comparison

Why are 21st century insulation options for buildings and factories more cost effective and offer better payback? Just take a look. Seeing is believing.

Heat Shield™ EPX-H2O Premiere Kit

Make your application even easier and save money too! Order our Premiere Kit and get 2-gallons of Heat Shield™ EPX-H2O, plus the Wagner Power Tex texture sprayer for simple application. Our patented insulating coatings are designed for a quick and easy installation.

Healthy House Paint™ Application

Lowering home heating and cooling costs is as easy as painting. See this short video of an attic application with zero voc, energy saving, Healthy House Paint™. Insulation + paint, makes decorating easy and energy efficient!