It’s starting to get warmer by the week, and many people are thinking about insulating homes and commercial buildings before the summer heat hits.
Spring is a perfect time to insulate walls, attics, ceilings, ductwork and skylights to ensure lower energy costs this year and for years to come.
When it comes to proven energy efficiency technologies for buildings, Energy Protect™ clear thermal insulating paint by Syneffex™ has undergone more tests in every type of climate (from Alaska to the Middle East) than most new technologies.
And the coating has continued to prove itself in each one… It’s effective, efficient, and cost saving with payback in just 3-5 years.
Energy Protect™ Clear Insulating Paint | Proven Performance, Tested and Re-tested Worldwide for Over a Decade
For many years, people have been programmed to think insulation has to be thick to work well.
But just as phones and computers have continued to get smaller at the same time as becoming more powerful, the same is true of the insulating technology behind our Energy Protect™ insulation for homes and commercial buildings.
Nano-engineering allows us to greatly reduce heat transfer in a thin film layer – just three coats of Energy Protect™ have been tested to reduce heat transmission by 34.8%, as tested over 8cm concrete wall sections with plaster.
It’s understandable that even though everyone is excited to hear that a thin film coating that is easily painted onto surfaces can provide significant insulation, for some it sounds “too good to be true.”
That’s why we wanted to take a moment to share some of the independent testing data and real world field studies that have substantiated the thermal performance, as well as the mold/mildew resistance, corrosion prevention, and UV resistance of our patented technology.
You can also see a quick overview on our website here: www.synavax.com/synavax-independent-testing-data
Independent Testing Data
The test standards referenced below have been developed by the International Standards Organizations of ASTM and ISO, as well as other standard testing authorities, such as British Petroleum (BP) and General Motors (GM).
ASTM stands for the American Society for Testing and Materials and is an international standards organization that develops and publishes voluntary consensus technical standards for a wide range of materials, products, systems, and services.
ISO stands for International Organization for Standardization and is an international standard-setting body composed of representatives from various national standards organizations.
The referenced tests below have been performed by Accredited Third Party Laboratories.
Want more? You can find data on adhesion strength, abrasion resistance, and more on page two of each of our product data sheets.
And… Have you seen our case studies?
Real world performance is just as important as how a technology tests in the lab. How else will you know if your laboratory results correlate with what your customers experience in every day life?
In the lab or in the field, our coatings excel around the world! Here are a few field study references that show the exceptional energy saving & protective performance of our coatings.
1) Residential Home Ceiling/Attic – Tulsa, Oklahoma?
2 1/2 years BEFORE Syneffex™ average monthly energy consumption: 2512 KWH
3 years AFTER Syneffex™ average monthly energy consumption: 1269 KWH
(Result was adjusted down by 3% to allow for margin of error)
Result: Average energy savings of 46% reduction of cooling costs.
2) Government Data Center – Monterrey, Mexico
A year-over-year comparison during the hottest month of the year was done inside the server room of their data center.
Result: 27% reduction in internal temperature of the data center, which protected the sensitive equipment.
3) Skylights at Frost Art Museum – Miami, Florida
Energy Protect was used to both insulate and help prevent dangerous UV ray penetration.
Result: The coating stopped the artwork damage from UV ray penetration, while still allowing through natural light into the museum. It also helped lower cooling costs.
We have over 100 case studies of all types at syneffex.com.
Still not convinced? Try a gallon or five for yourself and you will be.
You can order online on our website or just contact us for a quote and pay by check, wire, or credit card.
That’s Sustainability Accelerated™ and sustainability that’s thinner, better, and more cost efficient.
Making a Difference Globally. Daily. That’s What We Do!
